A measured drop for your BipodeXt
The Queen's MINI Equalizer Kit does the same job as the standard Equalizer, but with a smaller drop. Where the standard kit lets your rifle sit as low as possible, the MINI keeps it between 1.054 and 1.934 inches. Ideal if you want a lower center of gravity and better recoil control, but do not need to bring your build all the way down. That leaves a little more room under your fore-end while you still benefit from a more compact, stable setup.
How it works
Like its bigger brother, the MINI clamps onto the Front Plug of your BipodeXt and accepts a Picatinny rail at the front. By placing the rail inside or on top of the bracket, you choose the drop within the MINI range that fits your position and discipline. A small change with a clear effect on how your rifle sits under recoil.
Standard or MINI
Choose the MINI when you want a finer, more limited drop, and the standard Queen's Equalizer when you want to set the rifle as low as possible. Both fit the same BipodeXt models, so the choice is purely about how much lower you want to go. If you want to try every position, the two kits can also be combined.
Compatibility and what is included
The MINI fits the MSR, PRS and ELR Max BipodeXt models, with a Front Plug upgrade for older systems. The kit contains the Queen's bracket, a 17-slot Picatinny rail, six 10-32 x 5/8 inch flat head screws and a long 1/8 inch hex wrench.
Specifications
Type: compact lowering kit (Equalizer) for the BipodeXt stabilizer
Drop: 1.054 inch (26.8 mm) to 1.934 inch (49 mm), depending on mounting
Compatibility: BipodeXt MSR, PRS and ELR Max (Front Plug upgrade for older systems)
Material: aluminium
In the box: Queen's bracket, 17-slot Picatinny rail, 6x 10-32 x 5/8 inch flat head screws, long 1/8 inch hex wrench
SKU: BXT-Queen's Mini Kit L
Manufacturer: Accuracy Solutions
