Ugly Annealer + Soldeerbrander en gascilinder bundel

This bundle gives you everything you need to start annealing your brass in one go. You get the Ugly Annealer from Derraco Engineering, the Bernzomatic UL2317 pencil torch and a 400 gram Bernzomatic TX9 propane cylinder. The torch fits straight into the annealer's clamp and the cylinder screws right onto the torch. Fill the hopper, set the flame and the speed, and the machine anneals your cases one by one while you get on with something else. Buying the set also works out cheaper than buying the parts separately.

  • Complete set: Ugly Annealer, Bernzomatic UL2317 pencil torch and TX9 propane cylinder

  • The torch fits the clamp straight away, no modifications needed

  • Hopper holds over 150 cases in .308 size and feeds them automatically

  • Five caliber inserts included, from .223 Rem to .338 Lapua Mag, plus .50 BMG without an insert

  • Adjustable speed with digital readout, for a repeatable heating time

  • Stainless steel housing and an impact resistant polycarbonate front panel

     

* Due to the gas cylinder, this set is shipped only within the Netherlands.

€349,95 €314,96
You Save: 10%
Available from:23-11-2026

Or pay in instalments with Spraypay from €10,50 per month.

Low shipping costs

Secure & well-packaged shipping

Safe & Secure payment

30-day return policy

Stock:
10000 Items

Ugly Annealer bundle with pencil torch and propane cylinder - Derraco Engineering

Every time you fire and resize a case, the brass in the neck and shoulder gets harder. After a few reloads it shows in inconsistent neck tension, and eventually in split necks. Annealing the neck and shoulder makes the brass soft and uniform again. That gives you more consistent bullet tension, and your cases last longer.

The Ugly Annealer from Australia's Derraco Engineering does the job with a gas flame. A catching wheel takes one case at a time from the hopper and places it on a spinning wheel in the flame. Once the set time is up, the case drops out via a ramp and the next one follows. With this bundle the torch and gas come included.

What is in the bundle

  • The Ugly Annealer from Derraco Engineering, complete with inserts, wheels and accessories

  • The Bernzomatic UL2317 pencil torch in solid brass, with a control knob to set the flame

  • A 400 gram Bernzomatic TX9 propane cylinder

The Ugly Annealer's clamp is made for pencil torches with an outside diameter of 12.70 to 13.0 mm. The UL2317 falls right in that range, so there is no hunting around for a torch that fits. When your gas runs out, simply order a separate TX9 propane cylinder.

The annealer

The housing is #201 stainless steel. The front panel is impact resistant polycarbonate rather than acrylic, a choice Derraco made after an acrylic prototype broke when it was dropped. The wheels are aluminium with a nickel coating containing diamond grit, which keeps your cases spinning evenly in the flame, even after long use.

Five CNC milled inserts are included, covering the .223 Rem, 7.62x39, .308 Win, .300 Win Mag and .338 Lapua Mag case families. For .50 BMG you run the machine without an insert. The inserts have very little play, so the flame wraps evenly around the neck. To switch calibers, fit a different insert and set the front panel to your case length. According to Derraco, the annealer is CE certified.

How to use it

  1. Fit the torch in the clamp and aim the flame at the neck to shoulder junction

  2. Fit the right insert and set the front panel to your case length

  3. Light the torch and set the flame with the control knob

  4. Pick a speed on the digital readout and test with a few cases

  5. Check with temperature indicating paint that you reach the right temperature, and adjust the speed

  6. Fill the hopper and let the machine do the work

The aim is to anneal the neck and shoulder, not the rest of the case. The case head has to stay hard, or it will not hold pressure properly when fired. That is why you use 399°C Tempilaq to check your setting. Once you have found the right speed for a caliber, write it down, and next time you can set the machine right away.

Working safely with a gas flame

You are working with an open propane flame. Place the annealer on a non-flammable surface, in a well ventilated room, and well away from powder and primers. Do not leave the machine running unattended. Cases are hot straight after annealing, so put a metal container under the ramp.

Specifications

  • Type: gas annealer with hopper, torch and gas included

  • Brand: Derraco Engineering (annealer), Bernzomatic (torch and cylinder)

  • Bundle contents: Ugly Annealer, Bernzomatic UL2317 pencil torch, Bernzomatic TX9 propane cylinder 400 g

  • Housing: #201 stainless steel

  • Front panel: impact resistant polycarbonate

  • Caliber inserts: 5, for .223 Rem, 7.62x39, .308 Win, .300 Win Mag and .338 Lapua Mag

  • .50 BMG: without insert

  • Wheels: 2, aluminium with nickel diamond coating

  • Speed: adjustable, with digital readout

  • Torch clamp: CNC milled, for torches with an outside diameter of 12.70-13.0 mm

  • Torch: Bernzomatic UL2317, brass, pencil flame, control knob, lit with a lighter

  • Gas: propane, 400 g, CGA 600 threaded connection

  • Annealer accessories: catching wheel with .50 BMG slot, ramp, gas bottle stand, Allen key set, spare parts, storage pouch, power adapter, instructions

  • Certification: CE, according to Derraco

Not sure whether this annealer suits your calibers? Get in touch with us, we reload ourselves and are happy to think along. You can also browse our other annealers and accessories for the full range.

Ugly Annealer + Soldeerbrander en gascilinder bundel does not have any reviews yet. Share your experiences and post a review.
Ugly Annealer + Soldeerbrander en gascilinder bundel

Meest recente reviews

•
Alternative Products For: